The LCP037A/B is a high-performance processor with a 32-bit core for motor control and other applications. It also integrates a three-phase half-bridge gate driver module, which can directly drive 6 N-type MOSFETs.

Product Features:

96MHz 32 -   bit M0 core

Support three low -   power modes: sleep mode, shutdown mode, ultra-low power shutdown mode

·   Three- phase half-bridge gate driver module

·   Industrial working temperature

32KBytes   embedded Flash (bit width 32bit), supports prefetch function and read/write protection

4KBytes   SRAM (bit width 32bit), divided into two independent partitions, each partition is 2Kbytes

1.8V to 5.5V supply and   I/O

Two LDOs, one normally-on/backup power domain for low power consumption and one core power domain for system operation  

High -   precision power-on, power-down reset (POR_PDR)

Programmable low voltage reset (LVR) ,   8 low voltage reset points: 1.6V, 1.8V, 2.0V, 2.5V, 2.8V, 3.0V, 3.5V, 4.0V

Programmable voltage monitor (LVD), 8 voltage monitoring points: 2.0V, 2.2V, 2.4V, 2.7V, 2.9V, 3.1V, 3.6V, 4.5V  

4MHz to 20MHz high -   speed crystal oscillator (OSCH)

Built -   in factory calibrated 16MHz RC oscillator (RCH, 1% accuracy)

·   32KHz low-speed crystal oscillator (OSCL)

Built -   in factory calibrated 32KHz RC oscillator (RCL, 10% accuracy)

Built -   in PLL, maximum output 144MHz, jitter less than 100ps

·   Two-way UART

Two -   way SPI, support master-slave mode

All the way, support master-slave mode

1 16-bit advanced control timer TIM1

Five 16-bit general-purpose timers, TIM3, TIM14, TIM15, TIM16, TIM17  

1 16-bit basic timer TIM6  

1 independent watchdog timer  

1 window watchdog timer  

·   1 24-bit auto-decrementing system time base timer

·   1 WT Clock Timer

·   Up to 30 fast I/O ports

1 12 -   bit A/D converter, the highest conversion rate is 1MSPS, supports up to 24 channels, built-in temperature sensor

Integrated   3 operational amplifiers

·   Integrated three-way comparator

Integrated two 10 -   bit DAC digital-to-analog converters

·   Back EMF sampling circuit (HALL_MID)